EPGS-8-10 Electric Gripper
EPGS-8-10 is listed in the EPGS series for industrial automation. Listed control: I/O (3-wire). Compare the model data with your workpiece and installation requirements.
Technical profile and model data
Overview
Use the checks below to review EPGS-8-10 against your workpiece, tooling and controller.
- Check part variation and finger clearance throughout gripping and release.
- Confirm the required holding conditions, mounting space and open-close sequence.
- Request current specifications and include any drawings or wiring information you need.
Technical specifications
| Max. working stroke | 8 mm |
|---|---|
| Rated gripping force | 10 N ±20% |
| Max. recommended clamping load | 0.2 kg |
| Open/close time (one way) | 0.1 s |
| Machine weight | On request |
| Operating voltage | 24 V DC ±10% |
| Communication | I/O (3-wire) |
| Positional repeatability | ±0.1 mm |
| Dimensions | 38 × 23.6 × 84 mm |
| IP grade | IP40 |
| Certification | Certificates available on request |
| Operating environment | 0–40 °C, 20–85% RH |
Confirm the stroke definition, force conditions, finger design and workpiece before ordering. Request current values for unlisted fields.
Detailed description, features, and application notes
EPGS-8-10 is a compact I/O (3-wire)-controlled two-finger electric gripper. The published model data lists 8 mm maximum working stroke, 10 N ±20% Rated gripping force and 0.2 kg maximum recommended clamping load. Use these values for an initial shortlist, then confirm finger design and the current drawing for the supplied configuration.
Check the workpiece and control
Compare the full part size range with the gripper opening and finger clearance. Check part mass, material, surface contact and motion through the full cycle. The listed communication is I/O (3-wire). Confirm the controller wiring and mounting envelope before ordering.
What to send for selection
- Part drawing or dimensions, mass, material and contact surfaces.
- Robot or machine model, mounting space and finger arrangement.
- Motion or rotation requirements, cycle target and control interface.
For the selection method, see How to choose an electric gripper, gripping force, stroke and finger design.
Model questions
What stroke and force are listed for EPGS-8-10?
8 mm maximum working stroke and 10 N ±20% Rated gripping force. Confirm the measurement conditions against your part and fingers.
What is the maximum recommended clamping load?
0.2 kg. Include acceleration, contact position and finger length in the application review.
Which control interface is listed?
I/O (3-wire). Ask for the matching pinout and controller documentation with your enquiry.
- Typical lead time: 7 days, confirm on quote
- 12-month warranty
Need drawings, parameter sheets, or controller notes?
Ask for the current model-specific drawings, specifications and controller notes. Include the model, robot or controller, application, quantity and destination country.
Application checks for EPGS-8-10
Confirm finger design, part contact area, cycle time, and robot payload before final selection.
Model questions
Which control interface is listed?
I/O (3-wire). Confirm the supplied pinout and controller configuration for this model.
What supply voltage is listed?
24 V DC ±10%. Check the current wiring document for the supplied configuration.
What protection rating is listed?
IP40. Confirm suitability for your actual environment.
How should the fingertips be selected?
Match the fingertips to the part geometry, contact surfaces and required force. Send the part drawing for application review. See our finger design guide.
Before quotation
Send part size, part weight, robot model, finger length, cycle time, destination country, and quantity.